partial replacement of fine aggregate by slag sand

Use of Iron Slag as Partial Replacement of Sand to Concrete

20% and 30%) of iron slag as partial replacement of fine aggregate (sand) were cast into cubes for testing. 23.13 In this study, to make concrete, cement and fine

The Behaviour of Concrete by Partial Replacement of Fine ...

proportions of copper slag replacement with sand of 0 to 100% in concrete. It concluded that the maximum ... From Fig 1, The variation of slump for the partial replacement of Fine aggregate with copper slag and Cement with GGBS increased in the order of 51, 53, 54 and 56 mm for 0%(CS & GGBS), 10%CS &

Utilization of Copper Slag in M-Sand as Partial ...

fine aggregate by copper slag, Concretemixes, viz. Conventional concrete mixes with varying percentages of copper slag (10, 20, 30 and 40%) as fine aggregate replacement material were

Experimental Study on Partial Replacement of Fine ...

in compression and weak in tension. The aggregate is generally coarse gravel or crushed rocks such as limestone, or granite, along with a fine aggregate such as sand. The cement, commonly Portland cement, and other cementitious materials such as fly ash and slag cement, serve as a binder for the aggregate.

Sustainable use of industrial-waste as partial replacement ...

This paper reviewed some of these industrial wastes like waste foundry sand, steel slag, copper slag, imperial smelting furnace slag (ISF slag), blast furnace slag, coal bottom ash, ferrochrome slag, palm oil clinker etc. Out of these materials, maximum number of experiments have been conducted using waste foundry sand and copper slag as fine aggregate replacement, but still more examinations are required for other waste materials as replacement of sand in concrete.

Partial Replacement of Copper Slag as Fine Aggregate

Partial Replacement of Copper Slag as Fine Aggregate Ambrish E1, Dhavamani Doss S2, ShanmugaNathan N3, ... Fine Aggregate : Natural sand (river sand) Coarse Aggregate: Crushed aggregate ... concrete with partial replacement of fine aggregate by copper slag with various percentages of 0%, 10%, 15%

Sustainable use of industrial-waste as partial replacement ...

In the case of concrete where fine aggregate is replaced by waste foundry sand, steel slag and palm oil clinker, slump value reduces by increasing the percentage of replacement and concrete mix in which fine aggregate substituted by copper slag and bottom ash, slump value increases by increasing the replacement ratio.

replacement of fine aggregate with copper slag for hpc ...

Using Copper Slag as a Concrete Beams as Replacement of Copper Slag as Fine Aggregate High Performance Concrete Using Blast Furnace Slag as Coarse sometimes these are processed and than used.

"Study of Strength Properties of Concrete by Partial ...

Partial Replacement with Fly Ash and Copper Slag in Cement And Fine Aggregate" G Swathi1, G Dinesh 2 1 Assistant Professor, Civil Engineering Department, Aditya Engineering College, Surampalem, AP. 2Assistant Professor, Civil Engineering Department, Aditya Engineering College, Surampalem, AP.

Effect of Partial Replacement of Cement by Ground ...

In this project we have investigates the results of properties on concrete by partial replacement of cement OPC (43-grade) up to 20% with Ground-granulated blast furnace slag and fine aggregate replaced up to 40% by Marble slurry by conducting following testing are slump test, density test, compressive strength test,

UTILIZATION OF COPPER SLAG AS A PARTIAL REPLACEMENT OF ...

slag as a replacement of fine aggregate on the strength properties. In this report, M25 grade concrete was used and tests were conducted for various proportions of copper slag replacement with sand of 40%, 80% and 100% in

PPT on partial replacement of sand and aggregate ...

varying percentages of steel slag as partial replacement of fine aggregate (sand) and limestone aggregate as partial replacement of coarse aggregate should be cast into cubes for testing.

reusability of steel slag as partial replacement of cement ...

concrete using industrial steel slag as partial-replacement of natural-sand and steel fiber as an additive to the cement concrete and establish the ... cement concrete. ... Steel Slag as a Partial Replacement of Fine Aggregate In ... replacing steel slag at a level of 10%, 20%, 30% and 40% after 7, 14, 28 and 50 days of curing for an M35 grade ...

A Study on Copper Slag As Partial Replacement of Fine ...

properties of copper slag as a partial replacement of sand at different levels (0%, 20% and 40%). Copper slag is a by-product ... Generally fine aggregate used as sand, and coarse aggregate used as crushed stone etc. Coming to the sand it is a naturally occurring granular material composed of

Steel Slag as a Partial Replacement of Fine Aggregate In ...

Keywords: Steel Slag, Fine Aggregate, Compressive Strength, Flexural Strength, Tensile Strength. I. INTRODUCTION In general, concrete is a made up of basically three components namely water, aggregate (rock, sand or gravel) and cement, all

Utilization of copper slag as a partial replacement of ...

The effect of copper slag as partial substitution of fine aggregate on strength and durability properties of HPC, HSC, normal concrete were studied by various authors [44,46,47, 51].

What are the materials that can be replaced as fine ...

we cannot replace fine aggregate. we can replace sand as fine aggregate with. M sand or robo sand; crusher dust; some admixtures like flyash, puzzolona, GGBS are used to reduce cement content but nor fine aggreagate.

Partial Replacement of Copper Slag as Fine Aggregate

Partial Replacement of Copper Slag as Fine Aggregate Ambrish E1, Dhavamani Doss S2, ShanmugaNathan N3, ... Fine Aggregate : Natural sand (river sand) Coarse Aggregate: Crushed aggregate ... concrete with partial replacement of fine aggregate by copper slag with various percentages of 0%, 10%, 15%

What are the materials that can be replaced as fine ...

we cannot replace fine aggregate. we can replace sand as fine aggregate with. M sand or robo sand; crusher dust; some admixtures like flyash, puzzolona, GGBS are used to reduce cement content but nor fine aggreagate.

Studies on use of Copper Slag as Replacement Material for ...

Abstract. This work focuses on the use of copper slag, as a partial replacement of sand for use in cement concrete and building construction. Cement mortar mixtures prepared with fine aggregate made up of different proportions of copper slag and sand were tested for use as masonry mortars and plastering.

Utilization of Copper Slag in M-Sand as Partial ...

increased by the replacement of M-sand by copper slag, saves concrete material cost. Here we are using OPC of 53 grade, Well graded coarse and fine aggregate. 30% copper slag replacement showed Maximum workability. The workability of concrete had been found to decrease after 30% in concrete.

Study of Partial Replacement of Fine Aggregate by Iron Slag

possibilities of using iron slag as partial replacement of fine aggregate (sand) by iron slag. Iron slag was used to replace 25% to 30% of sand by weight at

Performance of Concrete Properties by Partial Replacement ...

with partial replacement of fine aggregates by copper slag. Dr. A. Leema rose, et.al, (Jan 2015) were described by "Performance of Copper Slag on Strength and Durability Properties as Partial Replacement of Fine Aggregate in Concrete" occupies unique position among the modern construction materials.

Experimental Investigation on the Mechanical Properties of ...

copper slag as partial replacement of fine aggregate. ... modified in using copper slag as a partial replacement for sand. Totally four concrete mixtures are prepared with different proportions of copper slag ranging from 0% (for control mix) to 50% with sand named as CC,

partial replacement of fine aggregate by slag sand

fine aggregate --cnki and broken steel slag as coarse aggregate and river sand as fine aggregate...polymers are used as partial replacement of fine aggregate, for coating, seali...